adding a SAN volume

[Orde, Angus]

Marc,

I have only played around with this, but apart from running ION.NCF
first, that looks like it should be fine. Just mount your volumes.

If that is not it, what I found more directly manageable is to do the
same thing from NoRM instead.
You run ION.NCF first, as before, then you should find "Storage
Services" with "iSCSI Services" at the bottom of your NoRM tasks.

You may have security turned on?
Or not remembered the Target Name (case-sensitive) properly?

I hope that helps.

Cheers,

Angus
========
Angus Orde
Development Leader (Comms & Infrastructure)
Computing Services (IMTS)
Leeds Metropolitan University
Leeds LS1 3HE
Tel: 0113 8123840
-----Original Message-----
From: novell-bounces at netlab1.oucs.ox.ac.uk
[mailto:novell-bounces at netlab1.oucs.ox.ac.uk] On Behalf Of Marc Gosselin
Sent: 13 June 2008 14:22
To: Novell list
Subject: adding a SAN volume

I've got a nw6.5 sp6 netware server with a volume sitting on a SAN using
iscsi. I set this up last year and forgot what I did to make it work, I
didn't write it down or enter the commands into the autoexec.ncf file. I
just had to reboot the server after 255 days and now that volume won't
come up. I did the iscsinit connect a.b.c.d. target_name command and got
no errors but can't figure out where to go from here. Help please and I
promise to document it this time!
 
Thanks,
Marc
_______________________________________________
Novell mailing list
Novell at netlab1.oucs.ox.ac.uk
http://netlab1.usu.edu/mailman/listinfo/novell


To view the terms under which this email is distributed, please go to http://disclaimer.leedsmet.ac.uk/email.htm